Fencing Posts and Accessories, Y Post, Studded T Post, Star Post, Metal Picket, Steel Picket, T-Post

Berming supplies steel posts made by high quality steel with galvanized or painted to colors. Various types and colors.

Metal Post Forms:
Y post
T post, and studded T post
Peach post
Square post
Picket post
Star post
More designs.

Fencing post uses:
For supporting mesh panels;
Fence posts for supporting barbed wire;
For support barbed wire and concertina wire above mesh panels.

Benefits:
Our fence post enjoys an improved rate of 30% in its mechanical property and physical propery compared with common steel posts with same section size;
Easily used, with a low cost;
Meet the requirement of national environmental protection, environmental friendly product;
Good theft-proof function with its unique design;
Our fence posts are substitute products of the common steel posts, concrete posts or bamboo posts.

Y Post

Y post is also known as Star Picket, Spar Picket, Star Post, Metal Picket, Steel Post, Steel Picket Fence Post, etc. In cross-section, the posts form a three-pointed star, about 10 cm in diameter. Most popular types are Black Steel Bitumen Coated Star Pickets of 165cm and 180cm in length, 7 hole punched for fixing metal mesh panels with screws or fasteners. For 165cm Black steel Y posts, 7600 post can be loaded per container for shipment. One end is pointed so the steel post can be more easily hammered into the ground, and the other end is flat to suit the hammer. Holes are pre-drilled along the length of the post to allow wires to be attached to the picket for fixing to Temporary Fence, Barrier Mesh etc.

Y fence posts are metal star pickets popularly used in Australian and New Zealand market, also known as Australia Fence Post.
Surface Treatment:

Black Coated Galvanized Steel Post

Galvanizing Black Coated Fence Post, Exported to Australia

Green Coated Y Post

PVC coated against corrosion, acid and UV resistant

Y Posts Varieties:
- Black Bitumen coated steel tubular or bar fence post
- Bright Hot-dip galv. star picket post or electro galvanized, or black bitumen coated
- Black, Green and other colors PVC-coated steel post
- Black steel Y Posts (Star Pickets) to Australia & New Zealand, packed in 1 X 20ft container, 165 cm Y Post Pickets of 1.90g/sm (approx 7,200 Star Pickets per container loading)

Post Length:0.45M, 0.6M, 0.9M, 1.35M, 1.5M, 1.65M, 1.8M, 2.1M, 2.4M, 3.0M
Usual weight: 1.25kg/m, 1.38kg/m, 1.58kg/m, 1.86kg/m, 1.9kg/m, 2.04kg/m
Material: Q235 carbon steel
Surface treatment: non-painted black steel, black Bitumen painted, HDG, electric galvanized.

Studded T Post

Weight: 0.83, 0.85, 0.93, 0.95, 1.15, 1.25 and 1.33lbs
Painted or without paint
Available with spade or without spade
Material: rail steel and billet steel

Painted or galvanized or zinc coated steel posts

Light weight T post, 6 feet tall, green coated with the stabilizer plate attachment

T post is used to be driven into ground, the flat plate helps stabilize the post for fencing installation.

Popular Steel T Posts to USA for Customers Choices:

Steel 5 feet studded T posts;
Studded T-Post (USA Type) heavy duty 8 foot;
Heavy Duty 1.33lbs 6 feet tall studded –t-posts type with spades;
Heavy duty 6 feet and the heavy duty 7 feet and the regular duty 6 and 7 feet t-post;
T and U post 4' metal studded no paint no spade .85 l/b;
4' metal studded no paint no spade 1.15 l/b;
Painted or galvanized or zinc coated steel posts: Available in .95 pounds/foot - length 5 foot thru 8 foot; 1.25 pounds/foot – length 5 foot to 9 foot; 1.33 pounds/foot – length 5 foot to 9 foot.

We offer other posts, including Square Post, Rectangle post, Peach post, Round post.

3D curved welded wire mesh peach post fence

POST INSTALLATION

Earth and Bedrock
a. Set posts plumb and in alignment. Except where solid rock is encountered, set posts in concrete to the depth indicated on the drawings. Where solid rock is encountered with no overburden, set posts to a minimum depth of 457 mm in rock. Where solid rock is covered with an overburden of soil or loose rock, set posts to the minimum depth indicated on the drawing unless a penetration of 457 mm in solid rock is achieved before reaching the indicated depth, in which case terminate depth of penetration. Grout all portions of posts set in rock.

b. Portions of posts not set in rock shall be set in concrete from the rock to ground level. Posts set in concrete shall be set in holes not less than the diameter shown on the drawings. Make diameters of holes in solid rock at least 25 mm greater than the largest cross section of the post. Thoroughly consolidate concrete and grout around each post, free of voids and finished to form a dome. Allow concrete and grout to cure for 72 hours prior to attachment of any item to the posts.

c. Test fence post rigidity by applying a 222.4 newtons force on the post, perpendicular to the fabric, at 1.52 m above ground. Post movement measured at the point where the force is applied shall be less than or equal to 19 mm from the relaxed position. Test every tenth post for rigidity. When a post fails this test, make further tests on the next four posts on either side of the failed post.