Galvanized 'Y' Pickets and Razor Wire Security System for Saudi Arabia

This combination of galvanized "Y" pickets and razor wire forms a strong and deterrent security system, offering enhanced stability and a formidable barrier against intruders. For the client project in Saudi Arabia, the specifications and dimensions of the fence and posts are as follows:

Galvanized Razor Mesh Fence Panels (30,000 Units)

• Panel Dimensions:
  • Width: 3 meters
  • Length: 2 meters
  • Total Length of Constructed Fence: 95,000 meters (95 kilometers)
• Wire Specifications:
  • Made from Galvanized Wire with a thickness of 2.5 mm.
  • Tensile Strength: 160 Kg/mm², ensuring high durability and strength under tension.
• Blades:
  • Material: Galvanized steel with a thickness of 0.5 mm.
  • Hot Dip Galvanized Coating: Approximately 70µ for excellent corrosion resistance.
  • Blade Type: Cupped type (as per provided drawings and images), with an angle of 270 degrees relative to the main wire.
• Cell Dimensions:
  • Each rectangular-shaped mesh cell is 15 cm x 7.5 cm.

Galvanized “Y” Shaped Pickets (3,000 Units)

• Overall Length: 2.5 meters per picket.
• Supporting Profile Bar Dimensions:
  • Dimensions: 60 mm x 60 mm.
  • Thickness: 2.35 mm.
• Additional Specifications:
  • Screws: Minimum 12 units per picket with 8mm diameter.
  • Plastic UV-Resistant Caps: 2 units per picket to protect the posts and ensure long-lasting performance.
  • Galvanized Clamps: Minimum 6 units per picket, shaped as “└⌂┘” (as per provided picture).
• Hole Diameter: 7 mm for proper fitting.
• Hooks: Each Y post should have 6 hooks (3 on each arm) welded as per the provided drawings and images.

These high-specification materials are intended to provide secure, durable fencing solutions suitable for the challenging environmental conditions in Saudi Arabia.

Engineering Drawings

This fence system features "Y" shaped pickets as the primary support structure. Each picket is crafted from a single galvanized steel piece, bent to form two arms at an outward angle.

• Picket Dimensions: 60 x 60 mm (square cross-section)
• Picket Length: 2.5 meters
• Picket Thickness: 2.35 mm
• Y Arm Dimensions: 60 x 60 mm
• Y Arm Thickness: 2 mm
• Arm Length: 50 cm
• Hot Coating: Approximately 400 g/m² (galvanized)
• Hooks: 3 hooks per arm for attaching barbed wire
• Cap: 2 UV-resistant galvanized steel caps per "Y" arm
• Hole Diameter: 7 mm (6 holes per picket)

Features

• Increased Strength: The "Y" shape provides enhanced stability compared to traditional posts.
• Razor Wire Attachment: Six welded hooks (three on each arm) securely hold razor wire coils.
• Mesh Integration: Razor wire coils are attached to the hooks, forming a highly effective barrier with sharp edges.
• Durability: Galvanized steel ensures corrosion resistance and longevity.

Razor Wire Specifications

• Coil Diameter: Approximately 250 cm
• Wire Thickness: 2.35 mm
• Hook Spacing: 7.5 cm
  

The razor wire is attached to a supporting structure, likely a metal grid or frame. The angle between the wire and the support structure is indicated as 270 degrees, suggesting a near-vertical orientation of the razor wire.

• Material: Hot-dip galvanized steel wire or stainless steel (AISI304 & 430).
• Diameter: 2.5 +/- 0.1 mm
• Tensile Strength: 160 kg/mm²
• Zinc Coating: ~200 g/m²
• Shape: The wire is wound into a spiral with sharp barbs extending outward.

The razor wire consists of a length of steel wire with multiple barbs extending outward at regular intervals.
Dimensions:

• The overall width of the wire section is 35-42 mm.
• The distance between the barbs is 22-27 mm.
• The height of the barbs is 15-17 mm.
• Material: The wire is made of stainless steel sheet with the standard AISI304A430.
• Coating: The wire is hot-dip galvanized with a coating weight of 200 grams per square meter.
• Strength: The steel wire has a thickness of 2.5 mm and an extension resistance of 160 kg per square meter.

Dimensions:

• Galvanized Clamps with 8mm Screws: These are indicated with an arrow and a note stating they are needed in 6 units for each picket.
• Pickets: These are the vertical elements of the structure. Their dimensions are not explicitly given.
• Steel Plate: A steel plate is shown with dimensions of 60x60mm, length of 250cm, and thickness of 2.35mm.
• Other Dimensions: Various dimensions are labeled on the drawing, such as 0.60, 0.16, 22-27mm, and 2.5mm.

• Screw used for connecting panel and picket
• 8mm Screw: 6unit for each Picket
• Galvanized Clamps: 6 unit per Picket